- Category: Supplier
- Country: United Kingdom
- City: YuYao
- Address: Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
- Listed: Nov 6 9:34 am
- Expires: 21 days, 19 hours
What step to do during the renovation is summed up after years of experience. If you don’t follow it, it’s easy to have problems. Therefore, when decorating, be sure to pay attention to each installation step of the workers during construction, so as to avoid some workers to jump directly to install in order to save trouble.
In general, the steps for installing a China Stainless Steel Sink are like this:
1, fixed position
Before installing the sink, you must first determine the location and size of the installation, so that we can order according to the size, it is best to have a plan of the sink, so as not to be inaccurate data, resulting in rework. In addition, after the sink is installed firmly, do not shake it from side to side, it is easy to leave a gap and cause looseness. Moreover, the most important thing to note is the tightness of the joint gap.
2, install the faucet and inlet pipe
Before installing the sink, the faucet and inlet pipe should be secured first, and the inlet pipe at the other end should be connected to the water inlet switch.
3, the sink is placed on the countertop
After the sink is placed in the countertop, it is necessary to install matching pendants between the wall and the countertop, but pay attention to the sealing effect of the sink as much as possible during the installation process.
4, overflow hole, filter
The degree of sealing of the overflow and the filter determines the effect of the use of the sink in the future. The higher the sealing degree of the overflow hole and the filter, the less likely it is to be problematic in the later stage.
5, install supporting pendant
Installation of pendants is generally considered to be the last step in the installation of the sink. Generally, only when the sink is bought, the workers will cut the countertops according to the size of the sink and put them into the countertops. When installing, each gap should be filled to avoid water leakage problems in the future.
6, drainage acceptance
After the whole installation of the water tank is completed, the water tank needs to be filled with water to do the drainage test. If there is leakage, the problem should be solved immediately.
7, edge banding
After the drainage test ensures that there is no problem, the sink can be edged. When sealing with silicone, it is necessary to ensure that the gap between the sink and the countertop is even and there is no water seepage.
8, clean up
After the installation is completed, the sink must be cleaned to clean up the debris during installation. Do not use water directly into the water, it is easy to cause blockage.
information about China Stainless Steel Sink : http://www.aunetads.com/view/item-1209551-China-Stainless-Steel-Sink-To-Avoid-The-Choice-Of-Moldy-Leakage-Tips.html
10 total views, 2 today