Welcome, visitor! [ Register | Login

$300,000.00

How do stainless steel sink manufacturers share the sink?

  • Category: Supplier
  • Country: United Kingdom
  • City: Yuyao
  • Address: Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
  • Listed: Nov 23 8:50 am
  • Expires: 5 days, 15 hours
3

Description

Stainless steel sinks are generally installed in the kitchen. They are the kitchen and bathroom products that are used every day in daily life, and are also a place that is easily overlooked in the acceptance of home improvement projects. So, how should the stainless steel sink be accepted? What is the acceptance criteria for the stainless steel sink? The Stainless Steel Sink Manufacturers will discuss the stainless steel sink acceptance problem with you.

First, check the integrity of the stainless steel sink as a whole

The stainless steel sink is installed in the kitchen. The main function is to use water to wash rice and so on. It is very important to have water leakage. Therefore, the first thing to check after installing the stainless steel sink is the overall integrity. degree. When inspecting, first look at the surface to see if there are gaps in the hole, then touch the hand to see if there is a real place, and finally open the kitchen sink faucet switch to put some water in the sink to see if there is any leakage. . If not, it is a complete stainless steel sink. Of course, you can also use a ruler to measure whether the flatness of each position is the same. The best stainless steel sink is generally between 0.1 mm.

Second, check the hardness and gloss of the stainless steel sink

In the material of the stainless steel sink, the most used are 301, 304 and 430 stainless steel, of which 304 stainless steel is the best, with antibacterial rust, wear resistance, high temperature, hardness, symmetry and so on. After the stainless steel sink is installed, it is necessary to check the hardness of the entire sink for gloss. Whether it is a 304 stainless steel sink or a stainless steel sink of other materials, it is necessary to see whether the surface of the entire sink is bright and symmetrical, and then use a little force to press the surface of the sink to see if it has a depression.

Third, check the joint between the stainless steel sink and the countertop

Stainless steel sinks are generally installed directly on the countertop. At the time of acceptance, it is necessary to pay attention to whether there is a gap between the joints of the stainless steel sink and the joint of the countertop. The size of the different kitchen sinks should be consistent with the position of the sinks reserved on the countertops to make it easier to use the stainless steel sinks in the future. When the stainless steel sink project is accepted, it is necessary to see if there is a good fit between the four sides and the countertop, and whether it can see obvious gaps. If not, it means that the stainless steel sink is installed very well.

Fourth, check the connection between the sink and the drain

In addition to checking the surface of the stainless steel sink, it is also necessary to check the underside. Generally, the bottom of the sink is directly connected to the drain. If the connection is not strong enough, the huge pressure generated by the large amount of water may break through the drain and cause “ The water is full of Jinshan. Therefore, it is necessary to check the connection between the sink and the drain. If it is a double sink in the kitchen sink, it should be better checked. The firmness of both drains needs to be checked.

information about Stainless Steel Sink Manufacturers : http://www.bestinjurylawyerusa.com/classifieds/business-opportunities_3/businesses-for-sale/stainless-steel-sink-manufacturers-tell-you-that-each-brand-has-a-different-quality_i47222

No Tags

11 total views, 2 today

  

Listing ID: 2625bf794849cac5

Report problem

Processing your request, Please wait....

Leave a Reply