- Category: Supplier
- Country: Afghanistan
- City: HuZhou
- Address: NO.688, Lianxi road, Nanxun, HuZhou city, Zhejiang Province, china
- Listed: Nov 29 12:31 pm
- Expires: 11 days, 18 hours
The mouth of the office elevator hall is often very crowded, because the mouth is at the peak of 10 times or even 20 times the flow of people, while the super high-rise sometimes has 60-80 times the flow of people, and the elevator hall is impossible to do. It is very wide, because there is no need on it, we often see that the first floor is still a fire door, which will narrow the mouth and make the problem bigger. Let’s take a look at the fuji Elevator Manufacturer to see what design requirements for the elevator hall in the office building.
So first of all, put the mouth in the foot. In addition, a group of elevators should preferably not exceed six. 4 or less is better. However, the number of elevators in the super high-rise is large, so it is very important to pay attention to one direction. People are likely to have too much pressure on the lobby, so there should be two sides with good entrances. If necessary, all sides can enter the door, or there is no commercial in the lobby.
In many buildings with a height of more than 200M, it is often the city’s landmark building. Because it is tall, it is generally thicker. The floor area of each floor is very large. The number of elevators is large, and the area of the core tube is also large. On the first floor. The number of people is also very large, so sometimes you can set up a double lobby, that is, the first and second floors have a lobby to solve the crowded in and out. In the first floor lobby, an escalator is directly connected to the second floor lobby.
information about Elevator Manufacturer : https://www.fujihd.net/
10 total views, 2 today